P1.2.3. Hotwater; P2.1. Temperature; P2.1.1. Delta Temperature; P2.1.2. Coffee Heater - LAVAZZA Cap 100US Manual De Instalación Y De Uso

p1. Products
p1.1. Global
p1.1.1. AutoProgram
p1.1.2. Prebrewing
p1.1.3. Milk Drainage
p1.1.4. Milk Cleaning
p1.2. Details
p1.2.1. Left products
p1.2.2. Right products
p1.2.3. HotWater
p2. System
p2.1. Temperature
p2.1.1. Delta Temperature

p2.1.2. Coffee Heater

p2.2. Security

p2.2.1. Operator Password
p2.2.2. Technical Password
p2.3. Options
p2.3.1. Cup Heater
p2.3.2. Antifreezing
p2.3.3. Unit Visible
p2.3.4. Buzzer
p2.4. Date/Time
p2.4.1. Date
p2.4.2. Date Format
p2.4.3. Time
p2.4.4. Time format
p3. Factory Default
s1. Maintenance
s1.1. Water filter
s1.1.1. New filter date
s1.1.2. Liters to Renew
s1.1.3. Filter limit
s1.1.4. Reset filter
s1.1.5. Filter enable
s1.2. Drillers
s1.2.1. Warning enabled
s1.2.2. Left driller state
s1.2.3. Right driller state
s1.3. Test mode
s1.3.1. Master test
s1.3.2. Left Coffee test
s1.3.3. Right Coffee test
s1.3.4. Water/Steam test
s2. System Info
s2.1. Identification
s2.1.1. Software Version
s2.1.2. Machine Code
s2.2. Error Log
s2.2.1. Errors
s2.2.2. Reset log
s2.3. Audit
s2.3.1. Counters from init
s2.3.2. Counters from reset
s2.3.3. Reset Audit
s3. Install/Uninstall
s3.1. Install
s3.1.1. Language
s3.1.2. Machine Code
s3.1.3. Display Contrast
s3.2. Uninstall
s3.2.1. Empty Boiler
• 16 •
P1.2.2.5.
Cappuccino
P1.2.2.5.1.
Test
P1.2.2.5.2.
Multiple
P1.2.2.5.3.
Type1
P1.2.2.5.4.
Dose1
P1.2.2.5.5.
Type2
P1.2.2.5.6.
Dose2
P1.2.2.6.
Milk
P1.2.2.6.1.
Test
P1.2.2.6.2.
Multiple
P1.2.2.6.3.
Type1
P1.2.2.6.4.
Dose1
P1.2.2.6.5.
Type2
P1.2.2.6.6.
Dose2
P1.2.3.
Hot Water
P1.2.3.1.
Test
P1.2.3.2.
Multiple
P1.2.3.3.
Manual Dose
P2.1.
Temperature
P2.1.1.
Delta Temperature
P2.1.2.
Coffee Heater
P1.2.2.5. Cappuccino
The full product is displayed and by pressing Enter the following
parameters may be selected/set:
Test: enables dispensing of the product.
Multiple: allows enabling or disabling of the double dose.
Type1: enables setting of product 1 (MILK).
Dose1: enables setting of the brewing time of product 1.
Type2: enables setting of product 2 (COFFEE).
Dose2: enables setting of the quantity of water for beverage 2.
P1.2.2.6. Milk
The full product is displayed and by pressing Enter the following
parameters may be selected/set:
Test: enables dispensing of the product.
Multiple: allows enabling or disabling of the double dose.
Type1: enables setting of product 1 (MILK).
Dose1: enables setting of the brewing time of product 1.
Type2: -
Dose2: -
P1.2.3 Hot water
Enables setting of the parameters for hot water. The following para-
meters can be selected/set:
Test: enables hot water dispensing.
Multiple: allows enabling or disabling of the function to dispense
up to eight beverages. Function not implemented.
ManualDose: enables setting of the quantity of water to be di-
spensed for each selection.
P2.1
TEMPERATURE
For each coffee dispensed, it is possible to change the temperature
of the water used during dispensing and programmed during the
installation phase.

P2.1.1. Delta Temperature

sets the temperature change for both groups; the setup is the tempe-
rature set and the change can be made by means of "+" and "-"
keys:
- by pressing "+" this temperature is increased.
- by pressing "-" this temperature is decreased.
P2.1.2. Coffee Heater (technician only)