Data Transmission Mode; System Requirements; Read Out Data From The Ca Spindle - Allmatic Clamp assist Manual De Instrucciones

ALLMATIC
8.5

Data Transmission Mode

1
-
Y
0 s
°
Fig. 9: Data transmission mode
1 Storage location of the CA spindle
2 Progress display
The CA spindle stores the last 200 clamping processes and the associated statistical data.
These can be transmitted via the data transmission mode in CSV format and evaluated via an
Excel spreadsheet.
8.5.1

System Requirements

Computer with USB 2.0 port and plug-&-play-compatible operating system.
8.5.2

Read Out Data From the CA Spindle

w MEE in data transmission mode
w CA spindle within range and clamped.
1. Select the CA spindles to be read out by pressing the button
ð Selection of the CA spindles (4) is activated. If no CA spindle is coupled at the corres-
ponding position, the selection cannot be activated.
Clamp assist
2
0
%
Y Y
0 s
°
3
-
Y
0 s 0 s
° °
3 Update interval
4 Selection of the CA spindle
Operation | 8
4
1
-
2
3
4
(4).
45 / 294
EN