Operating Instructions | Cooltronic G2.5 Hatch
1
About this product
Notes
Before putting into service always read care
fully through these operating instructions. The
document contains important information
necessary for operation.
Always note and follow all safety instructions
in this documentation!
Only use the recommended battery and origi
nal spare parts.
Protect the remote control from adverse
effects (impacts, extreme temperatures,
moisture, rain, liquids).
Danger!
Risk of choking due to small components
The battery and battery cover of the remote
control are small components and can be swal
lowed by children.
Æ Keep all small parts away from children.
Æ Children must be supervised, so that they do
not play with the Cooltronic products.
Cooltronic products may be used by children
from the age of 8 and persons with limited
physical, sensory or mental capabilities or a
lack of experience or a lack of knowledge, if
they are supervised during operation or have
been instructed in safe use of the products
and understand the potential risks.
Do not allow children to play with the Cooltronic
products or with the packaging material or
with parts of the packaging material.
81.0000.95.2936 | EN | 10.2019
Caution
Damage due to premature switching on!
If the airconditioning system is tilted during
installation and then returned to the horizontal
position, switching on too early can damage the
unit.
Æ Always wait at least 60 minutes before
starting up after installation or repair work
on the airconditioning system.
1.1
Intended use
The Cooltronic airconditioning unit is intended
for installation in drivers' cabs of utility vehicles,
in order to aircondition their interior with cooled
and dehumidified air. It enables engineinde
pendent thermal comfort in the driver's cab dur
ing breaks.
Note
The airconditioning unit may only be installed
and operated for the range of application
stated by the manufacturer in compliance
with the Documentation included with every
airconditioning system.
The product is approved for ADR operation.
Intended use also includes compliance with all
information in the documents accompanying the
product such as:
the technical documentation
the catalogues and brochures
in addition the relevant national laws and
directives
EN
17