Control Unit; Switching On / Switching Off; Select Function F0 To F6 - Man Cooltronic G2.5 Instrucciones De Manejo Y De Mantenimiento

Operating Instructions | Cooltronic G2.5 Hatch
2

Control unit

3 4
2
Cooltronic G2.5 control panel
1 Switch on and off (ON / OFF), selection of the
operating mode (automatic / manual), selec­
tion of the functions. LED flashes red during
operation.
2 LED has no function.
3 LED indicates whether the compressor or
compressors is/are in operation. LED lights up
green during operation.
4 Display of current software: Long press if
air­conditioning system is switched off.
5 Display shows the selected function and
operating state of the air­conditioning system.
6 Setting of the room temperature and fan
speed (only in manual mode), programming of
the remote control and selection of the tem­
perature display (Celsius or Fahrenheit).
2.1

Switching on / Switching off

ƒ Press the ON / OFF
The air­conditioning system always starts in
Function F4 (automatic operation).
ƒ On switching on the function of the LEDs is
tested and the following appears briefly in the
81.0000.95.2936 | EN | 10.2019
5
button of the control unit.
6
display: 88--Sc-L
ƒ Press the ON / OFF
conditioning is switched off.
Note
When starting up for the first time the air­condi­
tioning system starts with the parameters set in
the factory.

2.1.1 Select function F0 to F6

To select press the ON / OFF
press) until the required function (F0 – F6)
appears in the display.
F0 Manual operation
F1 Display of the temperature in the driver's cab
F2 Programming the operating period
F4 Automatic operation
F6 Display °C or °F
Note
Functions F3 and F5 are not assigned.
1
button again. The air
button (long
19
EN