Equipping The Torch - Abicor Binzel PP Instructivo De Servicio

PP
DANGER
Risk of injury and device damage when handled by unauthorised persons
Improper repair work and modifications to the product may lead to serious injuries and
damage to the device. The product warranty will be rendered invalid if work is carried out on
the product by unauthorised persons.
• Operating, maintenance, cleaning and repair work must only be carried out by qualified
personnel (in Germany, see TRBS 1203).
NOTICE
• Please take note of the following instructions:
 2 Safety on page EN-3

4.1 Equipping the torch

CAUTION
Risk of injury
Puncture or cut-in wounds may be caused by the wire electrode.
• Keep your hands out of the danger zone.
• Wear the correct protective gloves.
Equip the torch neck according to one of the following figures:
1
7
1 Types 24/36/240D
2 Contact tip
3 Tip adaptor
Fig. 1 Equipping the torch
NOTICE
• Slide the gas nozzle on the torch neck rotating it slightly clockwise.
BAL.0212.0 • 2018-07-16
2 3
4 Gas diffuser
5 Torch neck
4 Putting into operation
4
6 Type 401D
7 Gas nozzle
5
6
EN - 7