DeVilbiss SleepCube AUTOADJUST PAP Serie Manual Del Usuario página 20

SmartFlex Menu List
The SmartFlex menu is available in all modes and is a sub-menu that allows you to control various functions of your
device. It is accessed by pressing the down button while in this Advanced Menu.
Display Example
SmartFlex
3
SmartFlex Mode
Full Time
SmartFlex IRnd
3
SmartFlex ERnd
3
Exit Menu
Press 
Blower Off Menus
Compliance information can be viewed without turning the CPAP on. With the blower OFF (display shows OFF), press the
left or right arrow keys on the keypad to scroll through the information.
Display Example
OFF
Quick View Menu
Press 
Serial Number
HD000005
Adherence Score
83% (25/30)
SmartCode
F6CD-37F-357R
SmartCode
3CCC-377D-7J7X
SmartCode 30-Day
DWY4-3DB7-DJ7L
SmartCode 90-Day
752TT-47DB-7DT7C
SmartCode
ZDN-79FK-K7H
EN - 20
Description
This setting controls the amount of pressure relief.

OFF = SmartFlex feature is OFF
1 = least amount of pressure relief
3 = most amount of pressure relief
This setting controls the SmartFlex operating mode.

Full-Time means SmartFlex feature is always active.
Delay Only means SmartFlex feature is active only during the pressure delay cycle.
This setting controls the Inhale pressure waveform.

This setting controls the Exhale pressure waveform.

Pressing the up key exits the SmartFlex menu
Description
Blower OFF. The CPAP unit is plugged in to AC or DC power with the blower OFF.
Pressing the down key enters the Quick View menu. NOTE: The "Quick View" menu
is only shown if enabled from the clinical menu.
Shows the serial number of the device.
Shows the maximum adherence achieved for any period of thirty consecutive days of
use within a ninety-day time frame. The score represents the percentage of days,
within thirty consecutive days, where usage met or exceeded the 'Usage Threshold.'
SmartCode data is used for therapy management reporting. Therapy information is
1-Day
encoded in a series of letters and numbers and includes a special character for error
checking to ensure accuracy. Use the UP arrow or DOWN arrow keys to change the
SmartCode reporting period. There are five levels of SmartCode data: 1-day, 7-day,
7-Day
30-day, 90-day and Usage. Use UP or DOWN button to change between levels.
Usage
SE-DV54-1