Publicidad
Idiomas disponibles
Idiomas disponibles
Insert a tape.
1 Press DOLBY NR and turn Dolby NR on or off to
match the playback
tape.
DUNR
For tapes recorded
with DOLBY
NR, turn on
001
NR.
For tapes recorded
without
DOLBY
NR, turn off DO NR.
2 Press 4>
PLAY/DIR to start play.
Deck number playing
*Playback
side indicator
The tape counter
indicates
the tape running
length.
*Playback
side indicator
:
The front side is being played (forward).
<:
The back side is being played (reverse),
To
begin play with the remote control
Press TAPE on the stereo
receiver
or on the remote control
first, Then, press 4 b PLAY on the remote control to start play.
When tapes are loaded in both decks
Press
TAPE first to select a deck.
The selected
deck number
is displayed.
To
stop play,
press
STOP (or
CLEAR on the remote control).
To pause play, press II PAUSE (or I I SET on the remote control).
To resume
play, press again.
To
change the playback side,
press < FPLAY/DIR
in play or
pause mode,
To
fast forward or rewind,
press+
MS or -M$.
Then press
ESTOP
(or
CLEAR
on the remote control)
to stop the tape.
To start play when the power is off (Direct Play Function)
Press TAPE on the stereo receiver. The power is turned on and
play of the inserted
tape begins.
TO
set
the tape counter
to 0000
Press
STOP (or
CLEAR on the remote control) in stop mode.
The counter
is also set to 0000 when
the cassette
holder
is
opened
and closed.
If there
is a 4-second
or longer
blank between
each track,
a
search
for the beginning
of the current
or next track
during
playback
can be done easily.
Press
W
MS or FPl MS during
playback
referring
to the
playback
side indicator
(<
or P)
on the display,
For example,
when
PFIMS
is pressed
while
-
is displayed,
playback
of the next track starts.
The music sensor function
may not be able to detect tracks under
the following
conditions:
Bla]nks of less than 4 seconds
between
tracks
Noisy blanks
Long passages
of low-end
sound
Low overall
recording
levels
11
3
4
After playback
on one deck finishes,
the tape in the other deck
will start to play without
interruption.
1
2
3
4
Insert tapes into deck 1 and deck 2.
Press TAPE on the stereo
receiver
to select the
deck to be played back first.
Press REV MODE to select 1).
Press <
PLAY/DIR to start playback.
Pllayback continues
until
STOP is pressed.
ENGLISH
25
Publicidad
