Publicidad
Idiomas disponibles
Idiomas disponibles
2
2
35
E
S'TOP
m
Set the tape to the point where recording
will start.
The reverse
mode is automatically
set to Z.
Note that recording
will be done cm one side of the tape only.
1
2
3
4
5
Press TAPE on the stereo receiver,
Insert the original
tape into deck 1 ancl the tape
to be recorded
on into deck 2.
Insert the tapes with the sides to be played back or recorded
on facing out from the unit,
Press DOLBY NR to turn off the Dolby NR.
llCINR on the display of the stereo receiver
disappears,
Press TAPE on the stereo receiver to select deck
1.
"TP 1" is displayed.
Press
REC/REC MUTE to start recording.
Playing and recording
start simultaneously.
To stop
dubbing
Press
STOP (or
CLEAR
on the remote control).
To set the Dolby
NR when playing
back the dubbed
tape
Press
DOLBY
NR and turn Dolby
NR on or off tc) match
the
original tape,
22
3
:TOP
This function
allows you to make exact copies of both sides of
the original
tape.
The
reverse
side
of both tapes
will start
simultaneously
as soon as the longer tape has been reversed.
m
~ Dubbing
does not start from a point halfway
in the tape.
The reverse
mode is automatically
set to =).
The Dolby NR does not affect recording.
1
2
3
Press TAPE on the stereo receiver.
Insert the original
tape into deck 1 and the tape
w
to be recorded
on into deck 2.
B
Insert each tape with the side to be played back or recorded
$ ?
:,
on facing out from the unit.
##jj
!
Press SYNC DUB once or twice to start recording.
"~~ , $~
o
For recording
at normal speed,
press it once to display
;
~
NORM-DUB.
@ For recording
at high speed,
press
it twice to display
~
HIGH-DUB.
@
@
The tapes are rewound
to the beginning
of the front sides,
and recording
starts.
To stop dubbing
Press
tiSTOP
(or
WCLEAR
on the remote control).
To set
the Dolby NR when playing
back the dubbed
tape
Press
DOLBY NR and turn Dolby
NR on or off to match
the
original tape.
m
Recording
does not start, if the erasure
prevention
tab on either
side of the tape to be recorded
on is broken off.
To erase a recording
Make sure the microphone
is not connected
to this unit and the
Rhythm
play function
(page 12) is canceled.
1
Insert the tape to be erased into deck 2 and press
TAPE
on
the stereo receiver
to display
"TP 2".
2 Set the tape to the point where the erasure
is to be started.
3
Set the reverse
mode by pressing
REV MODE.
4
Press
REC/REC MUTE
to start the erasure.
ENGLISH
~~
Publicidad
