ACCESS TO LP30 MENUS
TEMPERATURE ADJUSTMENT
As well as the normal standard settings, thanks to the use of the additional board, the TEMPERATURE menu o ers the following further possibilities:
Boiler maximum and minimum setting (dhw storage tank)
Pu er maximum and minimum setting
BOILER TEMPERATURE SETTING
Note: if an instant heat exchanger is present for the production of domestic hot water, it will not be possible to set any temperature set
SET BOILER
BOILER MAX 58 °C
BOILER MIN 45 °C
P1
P2
PUFFER TEMPERATURE SETTING
Note: the screen is not displayed if the pu er is deactivated
SET PUFFER
PUFFER MAX 58 °C
PUFFER MIN 45°C
P1
P2
From the main screen, turn P2 to select the SET TEMPERATURE icon
Press P2 several times to con rm until the parameter of interest is displayed
Turn P2 to modify the value relative to the parameter of interest
Press P2 to memorise and continue or P3 to go back.
If you wish to exit without memorising, press key P1
P3
From the main screen, turn P2 to select the SET TEMPERATURE icon
Press P2 several times to con rm until the parameter of interest is displayed
Turn P2 to modify the value relative to the parameter of interest
Press P2 to memorise and continue or P3 to go back.
If you wish to exit without memorising, press key P1
P3
55