Machine Dimensions; Description; Operation; Identification - breviglieri mekfold 300 Instrucciones De Empleo Y Mantenimiento

MACHINE DIMENSIONS

202"
Model A
240"
MekFold 300 v.500
283"
MekFold 300 v.600
MekFold 300 v.700

1.3.1 DESCRIPTION

The mod. «MekFold 300» folding rotary harrow comprises a central bearing frame (10 Fig. 1) with three-point hitch which
couples two harrow units at the sides (3 and 15 Fig. 1). These latter can be folded upwards and closed, thus allowing the entire
machine to be transported on the roads (if is approved for road circulation in the country of use) or down very narrow passages.
This configuration allows work to be carried out in large areas. When the harrows are operating, the width of the implement me-
asures 5, 6 and 7 meters, depending on the model.
The two side harrow units are lifted and folded upwards thanks to a hydraulic control operated from the tractor.
The machine only operates when hitched to a tractor with an adequate power rating (consult the technical specifications for the
specific power). The implement is driven by the tractor via a driveline (with CE marking) which engages with the central transmission
unit (16 Fig. 1). Power is then transmitted to the two side final drives (19 Fig. 1) which operate the various blade rotors (14 Fig. 1).

1.3.2 OPERATION

The mod. «MekFold 300» folding rotary harrow is solely designed for use in agriculture in order to prepare, work and break up
the soil. One single person seated in the driver's seat of the tractor is able to carry out all the various operations.
Any other use of the machine differing from the explanations given in this manual relieves for Manufacturer from all and
every liability for deriving damage to persons, animals or property.

1.4 IDENTIFICATION

Each machine is provided with an identification plate (18 Fig. 1) with the following data:
▪
«CE» marking
▪
Manufacturer's name and address
▪
A) Machine model
▪
B) Machine version
▪
C) Serial number
▪
D) Weight (in kg)
▪
E) Year of manufacture
The data on the identification plate of the machine should be copied into the last page of this manual and must always be stated
when spare parts and/or assistance are required. Standard machine supply includes:
mekfold 300
56" 96.5" 100" 118 - 169 160 - 230
B C D
56" 96.5" 119" 132 - 191 180 - 260
56" 96.5" 141" 140 - 221 190 - 300
20
Kw HP n°
24
28
- 23 -
6129 6195
525 450
lbs lbs
6878 6945
lbs lbs
7628 7694
lbs lbs
macchine agricole
7055
500
lbs
7804
lbs
8554
lbs