Craftsman professional 152.229010 Manual De Instrucciones página 14

Figure 4-9 DRILL PRESS HEAD AND
MOTOR ASSEMBLY
X
\
T
The drHU press is a heavy machine; two peopb may
be required for certain assemMy operations,
MAKE CERTAIN the drHU press is disconnected from
the power source,
Figure 5-1
A
V
10, LooseUy assembb the tray back (T) to the tray (U)
with two pan head screws M5 x 35mm (V) and M5
hex nuts (X), See Figure 4-9,
Figure 4-10
U
B
1, Seat the drHU press head (A) on the coUumn (B),
See Figure 5-1,
Figure 5-2
11, Slide the tray (U) down onto the column (A) until it
rests on the ring (Y) and tighten both screws,
See Figure 4-10
2, Align the drill press head with the table and base
and tighten the two head locking screws (C),
See Figure 5-2,
14