Publicidad
Idiomas disponibles
Idiomas disponibles
DONOTexpose thedrillpressto rainor operate the
in damplocations,
MAKESUREallpartshavebeenassembled c orrectly
andarein working order,
SWITCH
OPERATION
CHmLDPROOF THE WORKSHOP
AREA by removing
switch keys, unplugging tools from the electrical recep-
tacles, and using padlocks,
Figure
8-1
Figure
8-2
4.
8.
8.
When the Drill Press is not in use, the "ON" button
should be locked so that it cannot be started,
Using the padlock (E) included with your Drill Press,
lift the red iOFF[ paddle (C) and place the padlock
through the hobs in the side of the "ON" button and
then lock the padlock, Make sure keys have been
removed from padlock and placed where no
children can get them, See Figure 8-2,
To use the Drill Press, unlock and remove the
padlock from the "ON" button,
1,
The ON/OFF switch (A) is located on the front of
the drill press head, See Figure 8-1,
2.
To turn the Drill Press on, press the green ON
button (B) in one-half inch, Note: There is a safety
feature on the switch to insure that the switch must
be completely pressed before the motor will start,
8.
To turn the Drill Press off, press the large red OFF
paddle (C) or lift the paddle and press directly on
the red "OFF" button (D), See Figure 8-1
and 8-2,
IMPORTANT: When the machine is not in use, the
switch should be locked in the OFF position to prevent
unauthorized use,
17
Publicidad
