Tool it DBT 300 Manual Del Usuario página 9

Translation of the original instructions
DISPLAY SCREEN CASE
Examples
The display shows HI
The display shows Lo
The screen is blank
The display flashes or displays RIPPLE
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
DBT 300
The battery voltage is too high for the tester.
The battery voltage is too low for the tester. Recharge the battery and repeat the
test.
The battery voltage is too low for the tester. Recharge the battery and repeat the
test. If the display remains the same, replace the battery.
The voltage is not stable. Charge the battery, then retest it. If the display remains
the same, replace the battery.
Analysis
EN
9