Option 2: Setting the Clock Automatically
The Clock can be set automatically if you are receiving a digital signal.
t,
Press the MENU button to display the menu.
Press the A or • button to select "Setup", then press the ENTER _
button.
Press the _, or T button to select "Time"_then press the ENTER _ button.
2,
Press the ENTER _
button to setect "Clock".
3,
Press the ENTER _ button to select "Clock Mode".
Press the _, or _" button to select "Auto"_ then press the ENTER _ button.
4,
Press the _, or V" button to select "Time Zone", then press the ENTER
button.
5,
Press the _, or T button to highlight the time zone for your local area, then
press the ENTER _
button.
6,
Press the A or _r button to select 'DST" (Daylight Saving Time), then press
the ENTER _
button. Press the A or T button to select "Off" or "On", then
press the ENTER _
button.
Press the EXIT button to exit.
Depending on the broadcast station and signal, the auto time may not be
set correctly. If this occurs, set the time manually.
The Antenna or cable must be connected in order to set the time
automatically.