Samsung 5 Serie Manual De Instrucciones página 70

Auto Wall-lVlount Adjustment (Sold separately)
Once the auto wall mount is installed, your TV's position can be easily adjusted.
Auto Wall-Mount
TV Rear Panel
EX-LINK Cable
(Not supplied)
Entering the menu
t, Press the A, _', _1 or I_ button on your remote control.
The Wall Mount Adjustment screen is displayed.
If the Wall Mount Adjustment screen is not displayed when clicking on
a direction button while watching your TV, use the menu to display that
screen.
• Press the MENU button to display the menu. Press the A or _' button to select
"Setup", then press the ENTER C# button.
• Press the _, or _' button to select "External Settings", then press the ENTER
button.
• Press the A or T button to select "Wall-Mount Adjustment", then press the
ENTER _ button.
Remembering the Position
2, Adjust to the desired position using the _,,T,4,i_ buttons.
If you press an arrow button when no OSD is displayed on the TV screen,
the Adjustment screen appears.
Press the INFO button to reset. Press the _ or I,_ button to select "Yes",
then press the ENTER _ button. The position is initialized to the default
setting.
3, Press the Blue button.
Press the A and _' buttons to select a save mode from either Position 1,
Position 2 or Position 3 in order to save the current position.
To not save the current position, press the RETURN button.
When selecting a save mode, you cannot use the Color buttons.
4, Press the ENTER _ button to save
When Position1 is selected, the message "Current position saved as
Position1" is displayed.
5, Press the ENTER _ button.
> The saved Position appears on the left side of the OSD.
Moving to the remembered position
t, Complete Step 1 of "Entering the menu".
2, Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to
the saved position.
I
You can move the wall mount to one of the 3 pre-set positions by pressing the Red (Position 1), Green (Position 2)
or Yellow (Position 3) buttons.
If you adjust the position after moving to a pre-set position, the position display will disappear.
> For installation, refer to the Installation Manual provided with the wall mount.
For product installation and the installation and moving of the wall mount, make sure to consult a specialized
installation company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
materials, please contact your nearest dealer.
> The auto wall mount wilt not work when Anynet + is operating.
LN37A53OP1 F, LN40A53OP1F and LN46A53OP1F models are not compatible with the older wall mount model
(WMN50eOA).