[] Viewing Closed Captions - Samsung 5 Serie Manual De Instrucciones

Viewing Closed Captions (On-Screen Text Messages) =Analog
The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external
device to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.)
t, Press the MENU button to display the menu.
Press the A or _' button to select "Setup", then press the ENTER _ button.
2, Press the _, or _" button to select 'Caption", then press the ENTER
button.
3, Press the ENTER _ button to select "Caption". Press the A or V button to
select "On", then press the ENTER C ,-_ button.
4,
Press the A or _r button to select "Caption Mode", then press the ENTER
button. Press the A or _' button to select submenu (Default, CC1-CC4 or
Textl~Text4) you want, the press the ENTER _ button.
Press the EXIT button to exit.
• The default is "CC1 .
• CCt: The Primary Synchronous Capuon Service. These are caD[ions
in the primary anguage that must be in sync with the sound preferably
matched to a specific frame
• CC2: The Special Non-Synchronous Use Captions. This channel
carries data that ts tntended [o augment information carned tn the
program
• CC3: Secondary Synchronous Caption Service. Alternate program-
related cap[ton da[a, [ypicalt_ second language cap[tons.
• CC4: Special Non-Synchronous Use Captions. Similar to CC2
• Text1 : First Text Service. This may be various non-program related
da[a
• Text2: Second Text Service. Additional data. usually no[ program
related.
• Text3/Text4: Third and Fourth Text Services. These data channels
should be used onl'_ if Text1 and Text2 are not sufficient.
:'- The Caption feature doesn't work in Component, HDMI or PC modes.
>- The availability of captions depends on the program being broadcast.
Press the CC button on the remote control to turn the Caption "On" or 'Off'.