Setting the On/Off Timer
t.
Press the MENU button to display the menu.
Press the A or _r button to select "Setup", then press the ENTER
button.
Press the _, or T button to select "Time", then press the ENTER C ,A button.
2o
Three different On/Off Timer Settings can be made. Press the _i,or T
button to select "Timer 1", "Timer 2" or "Timer 3", then press the ENTER
button.
3.
Press the _ or _ button to select the desired item below.
Press the A or T button to adjust the setting.
• On Time: Set the Hour. Minute. amlpm, and Activate inac[ rate.
(To activate timer _/ith the setting you've chosen, set to "Actwate .1
• Off Time: Set the Hour Minute. am/pm, and Activatellnactivate.
(To activate timer with the setung you've chosen, set to "Activate".'
• Volume: Set the requ_rea volume _eveL
• Antenna: Select "Air" or "Cable".
• Channel: Select the Jesired channel.
• Repeat: Select "Once. "Everyday", "Mon-Fri", "Mon-Sat'
"Sat~Sun".
or "Manual.
When "Manual" is selectee, press the I_ button to select the
aes_rea nay of the week. Press the ENTER _
eurton over the
eesirea nay and the _/mark wilt appear.
Press the EXIT button to exit.
>- You can set the hour, minute and channel by pressing the number
buttons on the remote control.
:'- Auto Power Off
When you set the timer On, the television wilt eventually turn off, if no
controls are operated for 3 hours after the TV was turned on by the
timer. This function is only available in timer On mode and prevents
overheating, which may occur if a TV is on for too long time.