Publicidad
Idiomas disponibles
Idiomas disponibles
Touch Temperature Controls
(select
models,
style
varies
by model)
The controls are located at the top front of the
refrigerator
compartment.
Contro[
_!!iii}ii,
Freeze
d
[initial
Centre[
Settings
After phgging
tile refrigerator
in, set the controls.
, Pressing the 1_i, or
pads adjusts the controls to
the desired setting.
, Set the freezer control on/4.
, Set the refrigerator
control on/4_
Let the refrigerator
run at least 8 to 12 hours before
adding food.
Warm
Cabinet
Surfaces
At times, the front of the refrigerator
cabinet may be
warm to the touch. This is a normal occurrence
that
helps prevent moisture from condensing
on the
cabineL This condition wiI[ be more noticeable when
you first start the refrigerator,
during hot weather and
after excessive or lengthy door openings.
Adjusting
the Controls
2/4 hours after adding food, you may decide that one
or both compartments
should be colder or warmen If
so, adjust the control(s}
as indicated
in the
Temperature Control Guide table below.
See page 21
for instructions
on checking
compartment
temperature.
, Except when starting the refrigerator,
do not change
either control more than one number at a time.
Allow 2/4 hours for temperatures
to stabilize.
Temperature
Control Guide
Refrigerator
too warm
Set the refrigerator
control
to
next higher number by
Refrigerator
too cold
Freezer too warm
Freezer too cold
Turn refrigerator
OF[:
Set the refrigerator
control
[to next lower number by
Set the freezer contro[ to
[Set the freezer control to
next lower number by
Press the freezer or
[ refrigerator
:_
pad until a
dash "-" appears in the
display.
Publicidad
