3. Sleep Mode Screen
The Sleep operating mode is similar to the Pulse Mode� The device
detects when the user begins to take a breath using a more sensitive
detection level� The SimplyGo then delivers a pulsed volume of oxygen
determined by the setting number� During inhalation, a low amplitude
and longer pulse duration is used to make sleeping more comfortable� If
no breath is detected for a period of time, the system automatically deliv-
ers a continuous flow of oxygen at a rate of 2�0 LPM�
Selecting the Operating Modes
You can use the Mode button (M) to select the device operating mode�
To select your operating mode:
1�
Press the Mode button�
Note: If the device is operating and the screen is dark, the first press turns on
the screen backlight� In this case, press the button a second time to
select the mode�
2�
Continue pressing the Mode button to scroll through the Pulse, Continu-
ous Flow, or Sleep modes.
3�
When your desired mode appears in the display, stop pressing the button
and wait� The display will return to the run time screen of the mode you
selected, and the device will operate in this mode�
SimplyGo User Manual
15