Selecting The Abs Functions - MV Agusta BRUTALE CORSA Manual De Usuario

4.4.7. Selecting the ABS functions

Press "SET" in order to access to "ABS" mode;
"SETTING ABS" appears on the display.
WARNING
The display modes may be changed or set
when the engine is off, the gear in neutral, the
motorbike stationary with your feet on the
ground. Do not change the display while dri-
4
ving.
Press "OK" for less than four seconds: "ABS NOR-
MAL" (ABS function for use on road) starts blinking on
the display.
If you do not press any button, after three seconds
the "ABS NORMAL" selection is confirmed; under this
condition, the ABS function for use on road is activated.
Press "SET" to exit the "ABS" mode.
OPERATION
- 60 -
4