Master Forge 1010048 Manual De Instrucciones página 20

INSTALLATION INSTRUCTIONS
LP Gas
If your grill is for LP gas, the regulator supplied is set for 11 in. water column (WC) and is for use with
LP gas only. The factory-supplied regulator and hose must be with a 20 lb. LP gas tank.
LP GAS System
Contact your gas supplier for special regulator for bulk gas that fuels other appliances
Gas Consumption
Total gas consumption of this grill with the burner(s) on "HIGH"
Locating the Grill
Clearance to Combustible Construction
Warning: Do not place grill under overhead, unprotected combustible surfaces.
A minimum clearance of 48 in. from the sides of the grill and a minimum clearance of 48 in. from the
back of the grill to adjacent vertical combustible constructions must be maintained.
building, garage, recreational vehicle, screened porch or any enclosed area. Keep the grill away from
ventilation air around the grill.
However, the manufacturer strongly suggests a 6 ft. clearance of the grill to combustible
constructions.
Clearance to Noncombustible Construction
A minimum clearance of 48 in. from the back of the grill above the cooking surface to noncombustible
constructions is required to allow the grill hood to open completely. A minimum of 48 in. clearance to
the sides of the grill above the cooking surface to noncombustible constructions is recommended.
The grill can be installed directly next to noncombustible construction below the cooking surface.
Burner Type
Main Burners
Side Burner
20
BTU/HR
10,000 x 4
12,000 x 1
. Do not operate the grill inside a
lowes.com/masterforge
®