Changing The On-Screen; Display - Denon DVD-756 Instrucciones De Funcionamiento

This player recommends the use of files recorded at the fol-
lowing specifications:
Applicable MP3 file Remarks
o It is prohibited to record
Sampling ¢4•1 kHz MP3 sound on a digital
frequency ¢8kHz device when the connection
is made digitally•
MPEG1 , MP3 files recorded at fixed
bit rate of 32 kbps or higher
Type audio layer 3 are recommended•
Applicable JPEG file
Upper limit:
Size of 6300x5100 dots
image Lower limit:
32x32 dots
Applicable WMA file
Sampling 44•1 kHz
frequency ¢8kHz
Bit rate ¢8-192kbps
Type WMA version 9
Remarks
, A JPEG image that extends
beyond the screen is
reduced so that it will be
displayed within the screen•
Remarks
o Those frequencies are
applicable to WMA version 9•
o Ensure that the copyright
function is set to off when
preparing a WMA disc•
o A prohibition "disable" sym-
bol will appear if the user
attempts to run a non-repro-
ducible file such as copy-
right-protected•
o Recorded in 5•1 channel for-
mat cannot be played back•
Information on MP3, JPEG and WMA discs
, This DVD player can play' back images and sounds from data
recorded in MP3 and JPEG formats on CD-R and CD-RW discs•
, A file with an extension of ".rap3 (MP3)' is called an MP3 file.
• A file with an extension of '•jpg (JPG)' or '•jpeg (JPEG)' is
called a JPEG file•
The DVD player can run an image file conforming to the
Exif specification• Exif is a file format, Exchangeable
Fmage File format established by Japanese Electronic
hdustry Development Association (JEIDA)•
, A file with an extension of '.wma (WMA)" is called a WMA file.
, Files whose extension is other than "•rap3 (MP3)', '•jpg
(JPG) ' and "•jpeg (JPEG)" or "•wma (WMA)' will not be
listed on the MP3, JPEG orWMA menu•
, Ffthe file is not recorded in MP3, JPEG orWMA format,
noise may be produced even if the file extension is either
Lmp3 (MP3)', "•jpg (JPG)', '•jpeg (JPEG) ' or "•wma (WMA) '•
• The name of group and track can be displayed up to 25 char-
acters. Unrecognisable characters will be replaced with aster-
isks. The ninth and deeper hierarchies cannot be displayed.
• Unplayable groups or tracks may be displayed depending
on the recording conditions.
, Ffthe TOP MENU button is pressed when a file list is dis-
played, the first item will be highlighted•
Kodak Picture CD
The DVD player can also run JPEG files stored on Kodak
Picture CDs• You can enjoy picture images on the television
set by playing back the Picture CDs•
For details of Kodak Picture CD, contact a shop that provide
developing service of Kodak Fnc•
n Hnstop mode, press the [V1ENU button. Kodak
• Ff"_¢_t' is shown at the right bottom, use the SKmP_4 but-
ton to view the next page. If "0_,_ '' is shown at the left bot-
tom, use the SKmP0_ button to view the previous page.
, It may take some time until all menu items are dis-
played on the menu screen.
F41Press the Cursor buttons (,& / T / _ / _"), select a
desired track to be played back, then press the
PLAY or ENTER button•
, If a Kodak Picture CD file is selected, an image will be
played back from the selected track and go to the next
one in turn.
Eli Press the STOP button, to stop playback•
NOTES on JPEG and Kodak Picture CD:
• A track is displayed for 5 or 10 seconds and then the
next track is displayed•
, Every press on the Cursor button (_) will turn the
image clockwise by 90 degrees when an image is dis-
played• A press on the Cursor button (-_) will turn the
image counterclockwise by 90 degrees•
, To change the size of the playback image, press the
MODE button twice• The size change mode appears on
top of the TV screen during playback• Then press the
Cursor buttons (-_ or I_) or ENTER button to switch
between NORMAL (100%) and SMALL (95%)•
, Progressive JPEGs (JPEG files saved in the progres-
sive format) will not be played back on this DVD player•
• High resolution JPEG files take longer to be displayed•
, The size change mode may have no effect on some
files (e•g• files with a small picture size)•
NOTES on WMA:
• The DVD player can reproduce data recorded as ISO
9660 level 2 with 31 characters file name included
punctuation marks• The name of file can be displayed
up to 25 characters•
• Maximum of 8 subfolders can be recognized•
• It can also be displayed tag information of WMA at
least 64 characters•
, A file with an extension of Joliet as Unicode format in
up to 64 characters can be recognized•
• This unit cannot play back copyright protected WMA files.
_ Changing the On-Screen Display "_
You can check information about the current disc by pressing
the DmSPLAY button on the remote control•
El
L_
I
on the previous page. The Cu'/erlttracknulrlber/
the nHrf be_ of focal _racks
track number of the currently
highlighted item and the total tracks are shown at the cen- Q
ter bottom of the screen.
-21 -
Press the D_SPLAY button
during playback•
• Current chapter number/total
chapters, elapsed time and
remaining time of the current chapter, and current play-
back status will be displayed.
Press the DISPLAY button again•
• Current title number/total titles, elapsed time and
remaining time of the current title, and current playback
status will be displayed•
Press the DISPLAY button
for the third time.
, The bit rate the amount of
v dec data current y be ng read)
and current playback status will be displayed.
• Current repeat setting appears on the right side of the
display bar only when the repeat setting is active•
( _, C: Chapter repeat/; T: Title repeat/A c; B: A-B
repeat)
• If you are playing back a two-layered disc, the layer
number will also be displayed•
(L0: Layer 0 is played back. LI: Layer 1 is played back.)
Press the D_SPLAY button again•
• Current HDMI status will be displayed during the HDMI
output mode•
Press the D_SPLAY button again to exit.
EN