Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Audio Setting
_<
You can change some Audio settings. It only affects during the
playback of DVD discs.
_'_ Press the SETUP
button
in stop mode=
_4_ Press the Cursor
buttons
(_
or _)
to select
CUSTOM,
then press
the ENTER
button=
• The custom mode will appear.
Press the Cursor
buttons
(_
or _)
to select
AUDIO,
then the ENTER
button
to confirm.
U
Press the Cursor
buttons
(A or T) button
to select
an item, then press
the ENTER
button=
o This menu display contains 2 pages. Press the Cursor
button (V) repeatedly to show the next page.
DRC (Dynamic
Range
Contro0
(Default
: ON}
_;_[_,
J'_
• DRC function compresses
the
range of sound volume.
• DRC function is available only on
the discs that are recorded in the
Dolby Digital format.
LPCM
SELECT
(Default
: OFF)
• Set to ON when outputting in
_L_._::/"_
48kHz (or 44=1kHz)=
o This function is available only on
digital outputting of a disc record-
ed in over 96kHz (or 88=2kHz)=
o Sounds of the DVD-Audio which
exceed 96kHz {or 88.2kHz
will be output as 96kHz (or
88.2kHz) even if LPCM SELECT
s set to OFF.
o This function is not effective for the HDMI sound output.
When playing
disc
w#h copyright
protection
• The sound will be down sampled at 48kHz (44.1kHz),
even if you set to OFR
DOLBY
D_G_TAL
_i_.................................
("
_
_ _:'_
.....
(Default:
BITSTREAM)|
o Set to BITSTREAM
when ihe play- /
er is connected to a Dolby Digital
|
decoder.
|
o This function is effective only for
L.
the COAXIAL> OPTICAL and HDMI
connections.
BITSTREAM:
DOLBY DIGITAL signals are output as Bitstream=
• For HDM! connection, if the connected equipment is
not compatible with the DOLBY Bitstream, the sig-
nals are output as PCM regardless of the setting.
PCM:Convert
Dolby Digital to PCM.
DTS
..............................
(Default
: BITSTREAM)QU!
|
_N&I:;
_<'N
o Set to BITSTREAM
when the unit |
is connected to a DTS decoder.
|
BITSTREAM:
L
DTS signals are output as
Bitstream.
o For HDMI connection, if the connected equipment is
not compatible with the DTS Bitstream, the signals
are output as PCM regardless of the setting.
PCM:Convert
DTS to PCM.
BASS
ENHANCER
(Default:
OFF)
o Set to ON for sound output on the
bass-woofer channel when 2-chan-
nel audio source is played back.
• This function is effective only for the
5.1 ch AUDIO OUT jacks. Set the
AUDIO MODE to ANALOG and
ANALOG AUDIO to MULTI CHANNEL to set this function.
• When SUB WOOFER
is set to NONE in the Speaker
Configuration,
BASS ENHANCER
will be set to OFF
automatically.
AUDIO
MODE
(Default:
HDMI)
_,,
o Select the sound is output from
_'_
_" _
whether HDMI jacks or 5.1ch
AUDIO OUT jacks.
HDMI: Sound is output via HDMI
connection. Output from
5.1 ch AUDIO OUT connection may be restricted.
ANALOG: Sound is output via 5.1 ch AUDIO OUT jacks.
Output from HDMI connection is cut off.
o Set to ANALOG when Super Audio CD is played back.
HDMI AUDIO (Default:
2 CHANNEL)_-
_,,
_
,.
o Select the number of channels for
|
@_
_,, ,,,,,,_
HDMI audio output between 2
|
CHANNEL and MULT! CHANNEL.
|
• Refer to the table on page 15 for |
the actual output settings.
o Connect appropriate
external
equipment for each setting and set AUDIO MODE to
HDMI beforehand to perform this setting.
2 CHANNEL:
2 channel signals are output from HDMI jack. Suitable
for monitors or projectors compatible with HDMI 2CH.
MULTI CHANNEL:
Multi channel signals are output from HDM! jack.
Suitable for monitors or amplifiers compatible with
HDMI multi channels.
• When MULTI CHANNEL is selected, the Speaker setting
menu for HDMI AUDIO will appear (refer to page 27).
ANALOG
AUDIO
(Default
: 2 CHANNEL)
• Set AUDIO MODE to ANALOG beforehand
to perform
this setting,
o 2 CHANNEL
: Output 2ch sound from the 5,1ch AUDIO
OUT jacks,
o MULT! CHANNEL
: Output Multi channel sound from
the 5,1ch AUDIO OUT jacks,
J
[]
Press the SETUP
button
to exit and activate
the
new settings.
_
Speaker
Setting
for ANALOG AUDIO
)
When MULTI CHANNEL
is selected for ANALOG AUDIO,
some speaker settings will be required.
o Set AUDIO MODE to ANALOG beforehand
to perform
this setting.
Press
the Cursor
buttons
(A or
_) to select
MULTI CHANNEL,
@_ii_
_"_
then press
the ENTER
button.
[]
Press
the Cursor
buttons
(A or
_) to select
the below
items,
then press
the ENTER
button.
• The custom mode will appear.
- 26-
EN
Publicidad
Tabla de contenido
