Descargar Imprimir esta página

Metra 99-5804 Instrucciones De Instalación página 4

Ford/lincoln/mazda/mercury 1995-2011
Ocultar thumbs Ver también para 99-5804:

Publicidad

Idiomas disponibles

Idiomas disponibles

Dash Disassembly 99-5804
Ford F150 1997-2003/F-150 Heritage 2004/
F-250 1998/Expedition 1997-2002/Excursion
2000-2005, Lincoln Blackwood 2002/
Navigator 1997-2002
1. Place your index fingers
on the inner edges of the
A/C vents and push inward.
(Figure A)
2. Grasp the exposed lip of
each vent opening and pull
out on the radio trim bezel.
(Figure A)
3. Remove the dash trim bezel
(airbag wiring does NOT
need to be disconnected).
(Figure A)
4. Using Metra's 86-5618,
pull the factory radio from
the dash and disconnect
the wiring.
5. Locate radio housing "B".
(Figure B)
Continue to kit assembly, p. 6
(Figure A)
(Figure B)
Kit Assembly 99-5804
Ford Econoline 1997-2008/Escape 2001-2007/
Explorer 1995-2001/Explorer Sport Trac
2001-2005/F-250/F-350/F-450/F-550 1999-2004/
Ranger 1995-2011/Windstar 1999-2003, Lincoln
Continental 1995-1997/Mazda B-Series
1995-2009, Mercury Moutaineer 1997-2001/
Mariner 2005-2007
1. Slide the DIN cage into the radio
housing and secure by bending
the metal locking tabs down. Then,
slide the aftermarket radio into the
cage until secure. (Figure A)
(Figure A)
4
2. Mount the rear support to the back
of the radio using the hardware
included with the radio. (Figure A)
3. Locate the factory wiring harness
Radio housing "A"

Publicidad

loading