Metra 99-5849CH Instrucciones De Instalación

KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) Heated seat buttons (L & R) Blank panels • E) #8 x 3/8" Phillips screws (4) • F) Panel clips (6)
• G) HVAC interface and wiring harness (not shown) • H) Antenna adapter (not shown)
A B
The World's best kits.
®
Ford F-150*
Ford F250/350/450 XL
* With manual climate control
Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Included interface for climate and
steering wheel functions
• Integrated passenger airbag indicator
C D
E F
MetraOnline.com
2015-2017 /
, XLT*
(w/ CD)*
• Painted charcoal
Note: This kit will not support the
Pro Trailer Backup Assist™ feature,
nor the massaging seats.
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
99-5849CH
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
2017
Dash Disassembly ...............................................2-3
Kit Preparation .......................................................4
Kit Assembly
- ISO DIN radio provision with pocket .................5
- ISO DDIN radio provision ....................................5
Axxess Interface Installation ............................6-15
Final Assembly ...................................................... 11
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Axxess interface built into kit
Antenna Adapter: Included with kit
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32" socket wrench • Cutting tool
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 9/27/19 INST99-5849CH