Dash Disassembly; Kit Assembly; Din Radio Provision With Pocket - Metra 99-5026 Instrucciones De Instalación

Dash Disassembly

Lincoln Aviator
2003-2005
(Figure D)
(Figure E)

DIN radio provision with pocket

1. Slide the DIN cage into the housing
and secure by bending the metal
locking tabs down. (Figure A)
2. Slide the aftermarket radio into
the cage and secure. Snap the
trim plate into the radio housing.
(Figure B)
3. Thread the rear support bracket
onto the back of the radio (or cage)
and secure with the mounting nut
supplied with the radio. (Figure C)
Note: Navigator DIN and ISO radio
kit assemblies, you must cut the
rear support bracket for clearance.
(Figure D)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
5. Reassemble dash in reverse order
of disassembly.

Kit Assembly 99-5026

(Figure A)
(Figure B)
5
Rear view radio
REAR VIEW HEAD UNIT
REAR SUPPORT BRACKET Rear support bracket
(Figure C)
(Figure D)