Publicidad
Idiomas disponibles
Idiomas disponibles
ISO DIN radio provision with pocket
1. Secure the radio brackets to the
pocket with the (4) #8 x 3/8"
Phillips screws provided. (Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Slide the radio into the pocket/
bracket assembly, and then secure
with the screws included with
radio. (Figure B).
4. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra or
AXXESS. Reconnect he negative
battery terminal and test the radio
for proper operation.
5. Attach the radio trim panel to the
completed assembly, and then
reassemble the dash in reverse of
disassembly. (Figure C)
Kit Assembly
(Figure A)
(Figure B)
(Figure C)
99-3045
ISO DDIN radio provision
1. Secure the radio brackets to the
radio with the screws included
with the radio. (Figure A)
2. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra or
AXXESS. Reconnect the negative
battery terminal and test the radio
for proper operation.
3. Attach the radio trim panel to the
completed assembly, and then
reassemble the dash in reverse of
disassembly. (Figure B)
3
(Figure A)
(Figure B)
Publicidad
