Iso Mount Radio Provision With Pocket - Metra 99-7423 Instrucciones De Instalación

ISO mount radio provision
1. Mount the ISO Brackets to the radio
with the screws supplied with the radio.
(Figure A)
2. Slide the radio into the radio housing
until it snaps into place. (Figure B)
3. Attach the radio housing trim plate
supplied with the kit to the assembly.
(Figure B)
4. Snap the pocket into the assembly.
(Figure C)
5. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
6. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-7423
with pocket
6
(Figure A)
(Figure B)
(Figure C)