Dash Disassembly; Nissan Altima 2007-Up - Metra 99-7423 Instrucciones De Instalación

Nissan Altima 2007-up

1. Unclip and remove trim panel between
the shifter and the radio/climate control
panel. (Figure A)
2. Remove (2) Phillips screws exposed
behind panel below radio/climate
control panel. (Figure A)
3. Unclip and remove the climate control
vent trim panel then remove (2) Phillips
screws exposed behind panel.
(Figure B)
4. Unclip, unplug and remove entire radio/
climate control panel. (Figure B)
5. Remove (5) T-20 Torx screws securing
the radio/climate control brackets then
unclip and remove the climate control.
Note: Retain the factory climate controls
for reuse during kit assembly.
Continued to kit preparation

Dash Disassembly 99-7423

(Figure A)
(Figure B)
(Figure C)
3
PASS
AIR BAG