Kit Assembly - Metra 95-3528 Instrucciones De Instalación

ISO DDIN radio provision
1. Attach the ISO DDIN brackets to
the radio using screws supplied
with the radio. (Figure A)
2. Locate the factory wiring harness
and antenna plug in the dash and
make all necessary connections
to the radio. Metra recommends
using the proper mating adapters
from Metra and/or AXXESS.
Re-connect the negative battery
terminal and test the radio for
proper operation.
3. Mount the new radio assembly into
the dash and reassemble the dash
in reverse order of disassembly,
leaving the cage removed in
disassembly out.
4. Snap the ISO DDIN trim plate onto
the completed assembly.

Kit Assembly

(Figure A)
95-3528
3