Iso Radio Provision With Pocket - Metra 95-5812 Instrucciones De Instalación

Ford multi-kit 2004-
Ocultar thumbs Ver también para 95-5812:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. For the Ford Freestar 2004-2007, Mercury Monterey
2004-2007, Ford Focus 2005-2007 and the Ford
F Series Super Duty 2005-up, slide the included
brackets onto the sides of the radio housings pocket
from the back of the housing forward. (Figure A)
If your vehicle is not listed above do not use brackets
and move to step 2.
2. Attach the included spacers to the back of the radio
housing mounting tabs. (Figure B)
Note: Use the screws supplied with this kit to mount
the radio housing in the vehicles that require the
spacers. Not all vehicles will require spacers.
3. Locate the factory wiring harness in the dash. Metra
recommends using the proper mating adapter from
Metra or AXXESS. Re-connect the negative battery
terminal and test the unit for proper operation.
4. Mount the ISO brackets to the head unit with the
screws supplied with the unit. (Figure C)
5. Slide the head unit into the radio opening until the side
clips engage. (Figure D)
6. Snap the Trim plate into the radio housing. (Figure D)
7. Reassemble dash in reverse order of disassembly.
Kit Assembly 99-5812

ISO radio provision with pocket

(Figure A)
(Figure C)
12
(Figure B)
(Figure D)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

99-5812

Tabla de contenido