Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS FOR PART 99-3002
DIN radio provision
Slide the DIN cage into the
1.
kit and secure by bending
the metal locking tabs down.
Slide the aftermarket radio
into the cage until secure.
(Figure A)
If an intermediate-mount
2.
installation is desired, attach
the Snap Spacers or Spacer
to the outer walls of the
(Figure A)
METRA. The World's best kits.
Kit Assembly
radio opening. Slide the DIN
cage into the Radio Housing
and secure by bending the
metal locking tabs down.
Slide the aftermarket radio
into the cage until secure.
(Figure B)
Locate the factory wiring
3.
harness in the dash. Metra
recommends using the
(Figure B)
™
1-800-221-0932
proper mating adapter from
Metra or AXXESS.
Re-connect the negative
battery terminal and test the
radio for proper operation.
Reassemble dash in reverse
4.
order of disassembly.
(Figure C)
metraonline.com
K
P
NOWLEDGE IS
OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
Publicidad
