Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1. DESCRIPTION OF THE HOIST
The bravo™ hoist is a portable manual
handle-actuated hoist for lifting, pulling and
tensioning, is normally used on a fixed
anchoring point or with suspension trolleys.
Information about suspension trolleys can
be obtained from TRACTEL
Manufactured from high-quality materials, the
bravo™ hoist is a robust tool. The hoist has a
compact design, is light-weight, portable and
easy to install.
The bravo™ hoist is supplied with a standard
1.50 m length of load chain (item 1, fig. 1). The
load chain used with the 0.25 t to 3 t models is
GB
formed by a single strand with a lifting hook
(item 2, fig. 1) at its end. The load chain used
with the 6 t model is formed by two lifting
strands and a sheaved lifting hook (item 3,
fig. 1).
2. TECHNICAL SPECIFICATIONS
5
6
1
6
Ø
2
1: load chain
2: lifting hook
3: sheaved lifting hook
4: low limit stop
5: suspension hook
6: safety catch
7: actuating handle
8: selector lever
9: load wheel
(*): Working load limit
®
on request.
C
Ø
4
7
WLL* of 0.25 to 3 t
The free end of the chain is equipped with a
low limit stop (item 4, fig. 1).
CAUTION: It is prohibited to fasten a load to
A disengage device allows for fast easy
adjustment of the chain using the limit stop.
This operation must only be performed with no
load on the hoist.
The bravo™ hoist is designed and built to
withstand dynamic testing at 1.1 x WLL and
static testing at 1.5 x WLL.
A
5
B
6
9
1
8
6
Ø
fig. 1
OK
fig. 2
4
the low limit stop.
C
Ø
4
7
3
WLL* of 6 t
OK
fig. 3
A
B
9
8
Publicidad
Tabla de contenido
