Kit Assembly; Important - Metra 99-4000 Instrucciones De Instalación

Note: This kit has been specially designed with
support ribs to insure structural integrity during
shipping. Please cut and remove these ribs from the
radio opening before beginning your installation.
For ALL vehicle models:
1. Remove the metal DIN sleeve from the
aftermarket radio.
2. Slide the sleeve into the radio housing and
secure by bending the metal locking tabs
down.
3. Slide the radio into the sleeve until it clicks in.
4. Locate the factory wiring harness and
antenna connector in the dash and make
all necessary connections to the radio.
Metra recommends using the proper mating
adapters from Metra and/or AXXESS. Re-
connect the negative battery terminal and
test the radio for proper operation.
5. Reassemble the dash in reverse order of
disassembly.
METRA. The World's best kits.
Installation instructions for part 99-4000

Kit Assembly

metraonline.com
™

IMPORTANT

If you are having difficulties with the
installation of this product, please call our
Tech Support line at 1-800-253-TECH.
Before doing so, look over the instructions a
second time, and make sure the installation
was performed exactly as the instructions
are stated. Please have the vehicle apart
and ready to perform troubleshooting steps
before calling.
K
NOWLEDGE IS
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
P
OWER