Dodge Ram 2006-2008, 2500/3500 2009, 2500/2300 chassis cab 2010
1. If vehicle has floor shifter, remove shifter knob.
2. Unsnap and remove console front top cover
(closest to the dash). (Figure A)
3. Remove (2) 8mm screws from under console cover
(previously removed). Remove front section of
console. (Figure B)
(Figure A)
Dash Disassembly 99-6507
(with full center console)
4. Loosen (2) 8mm screws at bottom of dash. Unsnap
lower panel.
5. Remove (2) Phillips screws facing up on front edge
of radio/climate control panel. (Figure C)
6. Unclip and remove entire panel surrounding radio
(Figure B)
7. Remove (4) 7mm screws securing radio to dash
(Figure C)
6
and climate controls, including A/C vents.
(Figure D)
and remove radio.
Continue to kit assembly
(Figure D)