Iso Radio Provision With Pocket - Metra 99-6507 Instrucciones De Instalación

Dodge/chrysler/jeep/mitsubishi multi-kit 2005-

Idiomas disponibles

1. Mount the ISO Brackets to the radio using the

screws supplied with the radio. (Figure A)

Note: You will need to remove the aftermarket

radio's trim ring if equipped.

2. Slide the radio into the opening until it snaps into

place. (Figure B)

(Figure A)

Kit Assembly 99-6507

ISO radio provision with pocket

3. Using the alignment pins on the trim plates & the

corresponding holes in the housing, attach the

upper trim plate and the lower trim plate supplied

with the kit. (Figure B)

4. Locate the factory wiring harness in the dash.

Metra recommends using the proper mating

Upper

trim plate

Lower

trim plate

(Figure B)

adapter from Metra or AXXESS. Re-connect the

negative battery terminal and test the unit for

proper operation.

5. Reassemble dash in reverse order

of disassembly.

Tabla de Contenido