Publicidad
Idiomas disponibles
Idiomas disponibles
1. Slide the DIN cage into the Radio Housing and
secure by bending the metal locking tabs down.
(Figure A)
Note: You will need to remove the aftermarket
radio's trim ring if equipped.
(Figure A)
Kit Assembly 99-6507
DIN radio provision with pocket
2. Slide the after-market head unit into the cage and
secure. (Figure B)
3. Using the alignment pins on the trim plates & the
corresponding holes in the housing, attach the
upper trim plate and the lower trim plate supplied
with the kit. (Figure B)
(Figure B)
10
4. Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapter from Metra or AXXESS. Re-connect the
negative battery terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order of disassembly.
Upper
trim plate
Lower
trim plate
(Figure C)
Publicidad
Capítulos
