To Remove The Covers - Husqvarna P 520D Manual De Usuario

• To clean the cutting deck, put it in the servicing
position and clean it with a water hose.
• When the product is clean, start the cutting deck for
a short period to blow off remaining water.
To clean the engine and the muffler
Keep the engine and muffler free from grass cuttings
and dirt. Grass cuttings soaked in fuel or oil on the
engine can increase the fire risk and the risk that the
engine becomes too hot. Let the engine cool before it is
cleaned. Clean with water and a brush.
Grass cuttings around the muffler dry quickly and are a
fire risk. Use a brush or remove the grass cuttings with
water when the muffler is cold.
To clean the cold air intake of the engine
1. Make sure that the cold air intake grille is not
blocked. Remove grass and dirt with a brush.

To remove the covers

To open the engine cover
1. Remove the rubber straps on both sides of the
engine cover.
2. Open the engine cover forward.
740 - 002 -
Note: To remove the engine cover fully, remove the
bolts by the hinges.
3. Tilt the seat forward.
To remove the right side cover
1. Remove the 3 screws and remove the side cover.
To remove the service hatch
1. Remove the 2 screws and lift off the service hatch.
To remove the cover plate
1. Remove the 3 screws and remove the cover plate.
125