Quick Start - Drucker Diagnostics HORIZON SERIE Manual Del Operador

Q S
UICK TART
Cycle Selection
To ensure repeatability, the centrifuge can be locked either on one cycle (Single Cycle Lock) or restricted to the saved
cycles (Preset Lock). The Single Cycle Lock also prevents making changes to the parameters of the selected cycle.
The Preset Lock allows selection of any saved cycle, but prevents changing the parameters of saved cycles.
Begins running the cycle displayed on the screen. The lid must be
Start
closed.
Allows access into the rotor chamber by engaging the unlocking
Unlock
mechanism. Entry is only possible when the rotor is stopped.
Pressing the UNLOCK button during operation will terminate the
Stop
run and unlock the lid after the rotor has come to a stop.
Press the up and down buttons next to the screen to select the
desired saved cycle.
| 4