Service And Repair; Optional Equipment; Disposal - RIDGID MegaPress Manual Del Operador

3. Place a small amount of anti-seize grease
on the threads. Install and securely tighten
a new Hex Shaft.

Service and Repair

WARNING
Improper service or repair can make
attachments unsafe to operate.
The "Maintenance Instructions" will take care
of most of the service needs of this equip-
ment. Any problems not addressed by this
section should only be handled by a RIDGID
Independent Press Tool Service Center. Use
only RIDGID service parts.
For information on your nearest RIDGID In -
depen dent Service Center or any service or
repair questions, see Contact Information
section in this manual.

Optional Equipment

WARNING
To reduce the risk of injury, only use
accessories specifically designed and
recommended for use with the RIDGID
MegaPress Press-In Branch Connector
Installation Kit, such as listed below.
Catalog
No. Description
52795 RIDGID M27 Hole Saw (27 mm)
53085 RIDGID 1 / " Pilot Drill w/Slotted Shank
4
For a complete listing of RIDGID accessories
available for these tools, see the Ridge Tool
Catalog online at RIDGID.com or call Ridge
Tool Technical Service Department (800) 519-
3456.
059-100-256.10_REV. A
MegaPress ® Press-In Branch Connector Installation Kit

Disposal

Parts of the RIDGID
Branch Connector Installation Kit contain valu-
able materials and can be recycled. There are
companies that specialize in recycling that
may be found locally. Dispose of the compo-
nents in compliance with all applicable regu-
lations. Contact your local waste management
authority for more information.
® MegaPress Press-In
13