Routine Control And Maintenance Operations And Safety Checks; Safety Information; Scrapping The Machine - RCM R850 N Serie Manual De Uso Y Mantenimiento

ROUTINE CONTROL AND MAINTENANCE OPERATIONS AND SAFETY CHECKS

The machine must be inspected by a specialist technician who checks its safety or for any damage or defects in the following cases:
•Before it is put into operation
•After modifi cations or repairs
•At regular intervals, as indicated in the «Routine maintenance and checks" table.
Every six months check that the safety devices are in good working conditions; the inspection must be made by authorized specialist staff .
To ensure that the safety devices are properly operating , the machine must be overhauled by specialist staff or skilled workshop every 5 years.
The person in responsable of the machine must make an annual check of its condition. During this checking, he must decide whether the machine
still complies with the technical safety regulations. After checking it has to apply on the machine a label of checking made.
Periodic maintenance and checks
1 check the battery electrolyte level
2 check coal brushes of drive and brush motor
3 check that the main brush is not entangled with string,wire,...
4 check the dust fi lter
5 replace the dust fi lter
6 check traces of side and main brush
7 check belt tension
8 check the engine oil level
9 check the engine air fi lter
10 clean the engine air fi lter
11 replace the engine oil
12 check the hydraulic oil level
13 replace the hydraulic oil (with "Agip Rotra ATF" type)
E electric machine
B petrol machine
Cleaning:
When cleaning and washing the machine, take care when using aggressive detergents, acids, etc.
Follow the instructions provided by the detergent producer, and wear protective clothing if appropriate (e.g. overalls, gloves, goggles, etc.
- see EEC directives on this subject).
Explosive atmosphere:
The machine is not constructed to work in environments where there is a risk that there might be explosive gases, dusts or vapours, and so
its use in an explosive atmosphere is FORBIDDEN.
Disposal of harmful substances:
Comply with the laws in force on waste disposal and treatment when disposing of the material collected, the machine fi lters and spend
material such as batteries, motor oil, etc.
The machine should be consigned to an authorised disposal organisation, which will manage disposal correctly, especially with regard
to the oil and fl uids, fi lters, and batteries. ABS and metal parts should be recycled as secondary raw materials. Rubber hoses and gaskets, and ordinary
plastic and fi breglass, must be separated and consigned to municipal waste companies.
The packing of the machine is manufactured by recycling materials. Consign the spent materials to operators authorized to dispose.
65

SAFETY INFORMATION

SCRAPPING THE MACHINE

every hours...
8 40 100 150 500
E B
E
E+B
E+B
E+B
E+B
B
B
B
B
B
1500
E+B
B