ENGLISH
CLEANINg AND MAINTENANCE
WARNINg!
Switch off the appliance before
any disassembly operation and
disconnect the plug from the
outlet.
- Remove the cover / motor unit from
the cooling bowl (4).
- Remove the stirrer (3).
- Remove the motor unit (1) from the
cover (2), by pressing the releasing
tongues at the same time.
- Clean the motor unit (1) by using
a soft and slightly wet cloth. Do
not wash it under running water. Do not immerse it into water or other
liquid substances.
- Before cleaning the cooling bowl, wait that it has reached the room
temperature. Wash the internal part of the bowl with a wet cloth and
dry carefully.
Do not immerse the cooling bowl into the water.
- Remove the stirrer from the motor unit, wash and dry it carefully
- Wash the cover and dry it carefully.
- All the parts must be washed by hands with lukewarm water.
- Do not wash any part in the dish washer.
- Do not use chemical or abrasive substances.
NOTE!
If the supply cable should be damaged, we recommend making it replace
at an authorised centre.
Contact an authorised LANGE DISTRIBUTION Service Centre for
maintenance work on your appliance.
Fig. 5