Transport And Storage; Packing Storage; Environment Conditions; Procedure In Case Of Malfunction - Oprema PREMIX Serie Manual De Operación Y Mantenimiento

GENERAL INFORMATION
EN

TRANSPORT AND STORAGE

To avoid damage of the cooling unit, it is important to handle with care during loading and unloading.
Crane can be used for unit movement only if unit is on pallet.
- DO NOT turn around the unit
- DO NOT shake the unit or complete packing
Unit has to be stored in adjusted and clean space, with temperature between 0-40°C. It is necessary to take care that
there are no leftovers of water in cooling unit. Do not store coolers one on the other, and take care to set them in
vertical position like as marked on packaging.
3217
PACKING POSTPONEMENT
When cooling unit is unpacked, it is necessary to check whether it is in proper condition (visually undamaged ). In
case of any doubt on damage of cooling unit within packaging, do not install and use the unit. During packing
postponement we ask you to respect local legislation about packing postponement. Do not incinerate packing parts
or throw them to the environment. Packing of this cooling unit can be recycled in total. Keep packing material away
from children.
AMBIENT CONDITIONS FOR INSTALLATION
Cooling unit has to be installed in the place where it is protected from rain, water sparkles, on place with
temperature correspondent to its climate class (marked on label Technical data); in case this terms are not assured
you lose warranty and malfunctions in performance are possible.
Possible climate classes are:
SN – temperature of environment from 10°C to 32°C
N – temperature of environment from 16°C to 32°C
ST – temperature of environment from 18°C to 38°C
T – temperature of environment from 18°C to 43°C

PROCEDURE IN CASE OF MALFUNCTION

Most of technical issues can be easily solved by simple procedures. In this purpose we ask you to read instructions
carefully before informing service people or manufacturer. In case you cannot solve the problem by using
instructions from this manual, please contact the seller from which the unit was bought. Keep units in good condition
and do not allow any modification on it, except if they are approved by the manufacturer.
DISPENSING PROCEDURE
During dispensing use open containers only
This type of cooling units has to be used for dispensing drink only for open containers and for immediate usage
(glasses, bottles). Dispensed product has to be used immediately: you cannot keep it or store in bottles.
Any other use is considered as not appropriate and with this potentially dangerous for health of consument.
Producer of cooling units disclaims any responsibility for damage occurred during inappropriate use of this
dispensing unit.
15
<page nr>