ROBLIN MAJESTY Manual De Instrucciones página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 22
• Clean the hood using a damp cloth
and a neutral liquid detergent.
Controls
A
Button Function
A
Turns the lighting system on and off at maximum intensity.
Turns the lighting system on and off in Courtesy Light mode.
B
Turns the Motor off.
Press and hold for approximately 5 seconds to Lock / Unlock the
Keyboard, for example in order to clean the surface.
C
Turns the Motor on at Speed one.
D
Turns the Motor on at Speed two.
E
Turns the Motor on at Speed three.
F
Activates/Deactivates Intensive speed from any other speed,
including motor off. This speed is set to operate for 10 minutes,
after which the system returns to the speed that was set before.
Suitable to deal with maximum levels of cooking fumes. Can also
be deactivated by pressing button B.
Press and hold the button for approximately 5 seconds, with
all the loads turned off (Motor and Lights), to turn the Activated
Charcoal Filter alarm on/off.
G
24H function
Turns the motor On/Off at speed one and allows recirculation for
10 minutes every hour. It cannot be activated if the Intensive or
Delay functions are in use.
When the filters alarm is triggered, the alarm can be reset by
pressing and holding this button for approximately 5 seconds.
These indications are only visible when the motor is turned off.
H
Delay function
Activates/Deactivates automatic switch-off with a 30' delay. Suit-
able to complete elimination of residual odours. Can be activated
from any position. It cannot be activated if the Intensive or 24H
functions are in use.
Press and hold the button for approximately 5 seconds, with
all the loads turned off (Motor and Lights), to turn the Remote
control on/off.
R
Remote control receiver.
10
Z
B
C
D
Lighting
• For replacement contact technical
support ("To purchase contact tech-
nical support").
E
F
G
Led
On/Off.
On/Off.
-
The buttons turn light up one at a time in cycle.
On/Off.
On/Off.
On/Off.
Flashes once a second.
Button B (Flashes twice)-Alarm Activated.
Button B (Flashes once)-Alarm Deactivated.
On/Off.
B flashes three times.
When the procedure terminates, the indication shown
previously turns off:
Button G flashes, indicating the need to wash the
metal grease filters. The alarm is triggered after the
Hood has been in operation for 100 working hours.
Button G flashes, indicating the need to change
the activated charcoal filters, and also to wash the
metal grease filters. The alarm is triggered after the
Hood has been in operation for 200 working hours.
On/Off.
Button B (Flashes twice)-Remote control Activated.
Button B (Flashes once)-Remote control Deactivated.
-
H
R

Publicidad

Tabla de contenido
loading

Tabla de contenido