Unpacking; Installation - FRICON SMR Serie Uso Y Mantenimiento

SMR

3.Unpacking

NOTES:
•
To protect the preservation equipment from damages, it must be transported
in its position of operation. Noncompliance with this rule results in loss of
warranty.
•
Before and during unpacking of the appliance, it must be visually inspected
for eventual transportation damages. Pay attention to loose parts, bulges,
hazards, visible fluid losses, among others. Eventual damages must be
immediately communicated to the installer. For other cases, contractual
conditions apply.
WARNING
•
Do not allow children to play with the packaging or its parts as they present
a risk of asphyxiation.
•
Damaged equipment may cause a short circuit or a return path to the ground.
Do not under any circumstances connect a damaged cabinet to the electric
circuit.

4. Installation

NOTES:
•
For the equipment's proper installation, check if it is placed on an even
surface and not near sources of heat and/or direct solar radiation or near
doors, windows, fans, and vents.
•
Only advertising labels in the form of thin film may be placed. Do not affix
thick insulation materials on the outer walls.
•
The shelves and divisions need to be assembled, and no product can be
placed on the base plates.
•
In equipment with an automatic defrost system, to conserve and display
frozen products in bulk, appropriate crates must be used to prevent the
products from falling or touching the walls of the equipment.
28
English