Problem Resolution Guide - FRICON SMR Serie Uso Y Mantenimiento

SMR
• The inner part of the lid can only be cleaned with a soft cotton cloth soaked
with a solution: of 90% distilled water and 10% isopropyl alcohol. Cleaning
products can destroy the covering.
• The outer part the lid can be cleaned with normal cleaning products.
NOTES:
• Do not use abrasive materials or mops as they will definitively damage the
appliance's surface.
• Do not remove fixed parts for cleaning. If necessary, they must be cleaned
by qualified personnel.
Replacing Components:
If any component is damaged, it must be replaced by an individual qualified for
this task.

9.Problem Resolution Guide

The Equipment Does Not Operate
• Check if there is an electric current.
• Check if the plug is properly inserted in the source outlet and if the voltage
and frequency are appropriate for operation.
Temperature is Unsatisfactory
• Check if the equipment has been connected long enough to have reached
operable temperature.
• Check if the appliance is not near heat sources.
• Check if the lids are properly closed.
• Check the temperature regulation.
• Check if the products do not exceed the load limit.
• Check if the room and defrosting probe thermostats are turned on correctly.
• Check if the condenser fan is operating.
• Check if the condenser is unobstructed.
37
English