Prolonged Non-Operation - FRICON SMR Serie Uso Y Mantenimiento

SMR
• Check if the external conditions exceed the limit of the equipment's normal
operation.
If none of the situations above applies, we advise that you contact an authorized
dealer.
WARNING
• Never attempt to repair the equipment or its electrical components by your
own means. Any repairs made by an unauthorized individual are dangerous
to the user and may result in the warranty's nullification.
• In case of gas leaks or fire, do not use water to extinguish the flames.

10.Prolonged Non-operation

If you intend to disconnect the equipment for a long period of time, you must
proceed as follows:
• Remove the products from inside the equipment.
• Disconnect the equipment by removing the power cord from the outlet.
• Open the lids and let it adapt to room temperature.
• Clean the equipment.
• Leave the lids slightly open to prevent odors.
When you intend to activate your equipment once again and have not used it for
more than 6 months, it is possible that the clock needs to be adjusted. To consult
the instructions for adjusting the clock, see Chapter "7.2 Adjust Clock" or
www.fricon.pt/support.
39
English