FRICON SMR Serie Uso Y Mantenimiento página 35

SMR
7.3. Set Point Adjustment
•
Press the SET button
(simply push the button)
•
Change the Set Point value
•
Confirm with the SET button
(simply push the button)
NOTE:
•
Pay attention to the preservation temperature specified for your products!
Chiller-Freezer mode change
7.4.
7. Disconnect electrical current;
8. Press and hold the PRG button while turning on the
equipment to the electric current;
9. The display shows the value "bn0";
10. Use the buttons "up" and "down" to switch between the possible settings:
a. bn1 – Freezer mode
b. bn2 – Chiller mode
34
English