Control Panel - FRICON SMR Serie Uso Y Mantenimiento

SMR

7.Control Panel

The appliances come with predetermined factory temperature settings. To
activate manual defrosting (in case it has this feature), follow the instructions in
this chapter below.
NOTE:
•
All the instructions in this chapter refer to the standard control panel (Carel
IR33+) used in the equipment. Nevertheless, there are other types of control
panels that may be used in the products. If that's the case, ask for the
instructions to the seller.
Key
Press down for more than 3 seconds, access the "F" parameters (frequent) or the menu to
define the password or access the "C" (settings) parameters menu; If there is an active alarm,
silence the alarm.
PRG/MUTE
Press down for more than 3 seconds to turn OFF the control panel; Press down for more than 1
second to turn ON the control panel; Upon defining parameters, increase the amount exhibited
or switch over to the next parameter.
ON-OFF/UP
Press down for more than 1 second to activate/deactivate the auxiliary output (lighting); Upon
defining parameters, decrease the amount exhibited or switch over to the previous parameter.
AUX/DOWN
Press down for more than 1 second to view and/or allow the user to define the set point; Press
down for more than 5 seconds to initiate manual defrosting.
SET/DEF
Fig.5 — Carel IR33+ controller
Press Key
32
English