Promax PROLITE-63 Manual Del Usario página 71

USER'S MANUAL PROLITE-63
1.- Menu Bar
There are the menus of the program (See section 6.3).
2.- Language in use
It shows the flag identifying the selected language.
3.- Active function selection tab
There are four tabs corresponding to each one of the two functions that are
available at the program. They are: Optical Power Meter and Optical Loss
Test Set. When clicking on one of these tabs, you access a window where
you can view the loggers function.
4.- Connection Status
It shows data corresponding to the model, serial number and firmware. Only
when the connection is succesful (see figure below):
If the connection fails you see next figure:
5.- Logger Display Window.
It appears data loggers that have been selected at the Logger Selection
Window.
6.- Logger Options.
It shows all the options you can do with loggers. To perform any of this
options you have just to click on it. They are:
Receive loggers from the
equipment:
Delete loggers from
the equipment:
06-2011
Figura 14.- Conexión establecida.
Figura 15.- Conexión deshabilitada.
It transfers the selected loggers at the
active function from the instrument to
the computer.
It deletes on the equipment the loggers
selected at the active function.
Page 25